
Key takeaways
Before paying a deposit: five conditions for starting the transaction
Separate matters that require a clear answer before proceeding from parameters that can still be negotiated.| Area | What should be established | What to do if confirmation is missing |
|---|---|---|
| Seller identity | Legal name, appropriate register, status, address and authority of the person signing the documents. | Hold payment until the matter is clarified. |
| Bank account | Confirmation that the beneficiary matches the counterparty, or documented grounds for payment to another entity. | Do not transfer funds solely on the basis of an email. |
| Goods being purchased | Source of the goods, preparation method, extent of any prior selection, exclusions and inspection method. | Do not accept “good quality” as a specification. |
| Shipment status | Basis for treating the cargo as used products, or a correctly established waste procedure. | Clarify the classification before shipment. |
| Origin and payment | Documentation supporting any CETA preference and the evidence required to trigger subsequent payments. | If the preference cannot be substantiated, recalculate the purchase without it; if payment conditions have not been agreed, do not release further funds. |
A lack of CETA confirmation does not in itself mean fraud or that the business relationship must be terminated. It does mean that the calculation should not be based on an undocumented assumption of zero customs duty.
How to verify a Canadian exporter
Use the appropriate register, not just the company's website
Start by establishing the legal form of the business and where it is registered. Corporations Canada covers entities incorporated under federal corporate law, but it does not replace provincial and territorial registers. The absence of a company from the federal database is therefore not, by itself, proof that the business does not exist. [4]Compare the registration details with the contract, quotation and pro forma invoice. Check the full legal name, registration number, status, address and details of the people authorised to act for the company. If the seller uses a trading name that differs from its legal name, establish the relationship between the two.Keep a record of the verification result together with the date. This makes it possible to reconstruct what information was available when the decision was made.Business Number and export formalities
The Canadian Business Number — BN is a nine-digit business identifier. Related programme accounts are used for specific administrative programmes. A BN should not be confused with a US EIN or an EU VAT number. [5]The CBSA states that use of the Canadian Export Reporting System requires an appropriate BN and RM programme account. Possessing such a number does not, however, confirm the supplier's quality or the accuracy of documents for a specific shipment. [6]Rather than asking for a generic “licence to export clothing”, ask what formalities apply to the shipment, who will complete them and what evidence you will receive. Canadian requirements distinguish between export reporting and permits relating to controlled or restricted goods. [7]The bank account must fit the transaction structure
Compare three elements:seller named in the contract → invoice issuer → payment beneficiary.A discrepancy may have a legitimate explanation, but it should be clarified before any transfer is made. If payment is to be made to another entity, request documentation explaining that entity's role and the basis on which it is receiving the funds.Confirm any change of bank account through an independent channel using previously verified contact details. Do not rely solely on the telephone number included in the message containing the new payment instructions.Sanctions: checking the name is only the first step
Before making a payment, check current EU sanctions sources and the Polish Ministry of the Interior and Administration list. Take into account available information on ownership and control of the counterparty and the entities involved in the payment. A matching or similar name requires clarification; equally, the absence of a name from one list does not conclude the entire assessment. [8]The Canadian sanctions list can also be used as a supplementary source. The Government of Canada notes, however, that its consolidated version is an administrative tool and that the applicable obligations arise from the relevant legislation. [10]
How to confirm that there are real goods behind the company
The warehouse and the way the shipment is prepared
A video call from the warehouse should help you understand the process, not merely show you a selection of garments.Ask to see the areas where goods are received, prepared and stored. Establish where the collected clothing comes from, whether specific categories are removed before sale, how long the shipment remains in storage and how individual bales are identified.The central question is: can the goods shown during the call be linked to the lot allocated to your order?A warehouse photograph or video is supporting evidence. It does not replace a specification, weight documents or inspection of the cargo.Shipment history and references
Ask for anonymised documents from previous shipments of similar goods. These can help verify the consistency of the seller's details, ports, carriers and shipping arrangements. There is no need to obtain confidential pricing information relating to other customers.Verify references by contacting the buyer through independently sourced contact details. Ask about delivery consistency, weight discrepancies, the nature of complaints and how they were resolved. A generic response such as “everything was fine” is less useful than information about several actual transactions.Sales sample versus a sample from the ordered lot
A few garments sent as a sample primarily demonstrate the characteristics of those particular garments. They do not establish what an entire container will contain.To assess a shipment, agree how the bales and individual items to be inspected will be selected. Record who selects the sample, when it is taken and how the inspected material is identified. If the result is intended to represent the wider shipment, the supplier should not be able to select only the best packages.CN 6309: customs classification does not determine waste status
What the code means
Under Polish rules concerning the transport of goods, CN 6309 00 00 covers worn clothing and other worn articles. [20]HS heading 6309 nevertheless has specific conditions: the articles concerned should show appreciable signs of wear and should be presented in bulk or in bales, sacks or similar packings. Both conditions arise from Note 3 to Chapter 63 of the HS, also published by the Canadian customs administration. The code should therefore not be applied automatically to every shipment commercially described as “second-hand”. [11]For customs clearance in the EU, the classification of the specific consignment and the current tariff measures should be checked in the EU's TARIC system. The Canadian tariff is not the source for determining the duty payable on imports into Poland. [12]When does waste-related risk arise?
Waste law applies a different assessment from customs classification. The definition of waste refers to a substance or object which the holder discards, intends to discard or is required to discard. The price, invoice and CN code do not replace an assessment of the material's actual nature. [21]For unsorted clothing, it is therefore necessary to determine whether the shipment consists of used products requiring further commercial sorting, or a stream that still requires waste preparation for reuse.Useful evidence includes information about the source of collection, any prior assessment, the condition of the items, the intended use of the shipment and the exclusion of materials unsuitable for that intended use. A seller's declaration alone should not replace evidence relating to the cargo.Waste shipments from Canada
Regulation (EU) 2024/1157 generally applies from 21 May 2026, with transitional provisions including those set out in Article 85. For imports of waste for recovery from countries covered by the OECD Decision, such as Canada, Articles 52–53 are relevant. [22]Not every such shipment is subject to the same procedure. Depending on the type of waste and whether the relevant conditions are met, prior notification and consent may be required, or general information requirements may apply, including those under Article 18. The term “textiles” should not be assumed to mean that the simplest procedure automatically applies. [22]Do not ship an unclear consignment on the assumption that its status can be determined only after it reaches a Polish port. Before loading, consult the documentation with a specialist in transboundary waste shipments and, where necessary, with the competent authority.
New requirements for used textiles
Directive (EU) 2025/1892 provides for detailed documentation of professional shipments of textiles assessed as fit for reuse. This includes, among other things, information on direct reuse, prior sorting or professional assessment and a declaration that the shipment does not contain waste. The transposition deadline is 17 June 2027. [23]That deadline is not evidence that no national obligations exist before that date. For an importer, the practical conclusion is already clear: the documentation should explain why the specific shipment is being treated as goods.CETA: when can 0% customs duty apply?
Shipment from Canada does not mean Canadian origin
CETA provides for the elimination of customs duties on qualifying originating products. For used clothing under heading 6309, a 0% customs duty rate may apply, but only when the agreement's conditions are met. It is not an automatic preference for every container leaving a Canadian port. [14]Annex 5 to the CETA Protocol provides, for heading 63.09, for a change from any other heading. It must, however, be read together with the other conditions, including Article 7 on insufficient production. Sorting, classifying or simple repackaging does not automatically confer preferential origin. [13]Ask the exporter to explain the origin basis for the specific shipment, rather than merely stating that the clothing was collected in Canada. If there is any uncertainty, have the documents assessed before accepting a price calculation that assumes preferential treatment.How to check customs duty without preferential treatment
In TARIC, check the appropriate code, declaration date, origin of the goods, available preferences and any additional measures. The European Commission states that the database integrates tariffs, preferences and restrictions, among other measures, and is continuously updated. [12]Prepare two calculation scenarios: one with a documented CETA preference and one without it. Do not approve the commercial viability of the order on the basis of an unconfirmed duty rate.Import VAT: the purchase price is not the entire taxable amount
The standard VAT rate in Poland is 23%. [18]For a typical import, the taxable amount is the customs value plus any customs duty due. Article 30b of the Polish VAT Act also provides for the inclusion of certain incidental expenses, such as commissions, packing, transport and insurance, where they have not already been included in the customs value. The first place of destination in Poland and any other destination within the EU known at the time of importation are relevant. [19]A practical formula for an ordinary non-excise import is therefore:VAT taxable amount = customs value + customs duty due + costs and charges that must be added under Article 30b, without counting the same items twice.Before placing an order, prepare a breakdown with your customs agent showing what is included in the exporter's price, who pays the freight, what costs will arise at the port and how much transport to the sorting facility will cost. Separate the cash outflow associated with VAT settlement from the assessment of the economic cost of the purchase; discuss the accounting treatment with your accounting team.Documents to prepare before shipment
There is no single set of supporting documents that applies to every transaction. As a working list for a typical container purchase, consider:- the contract or confirmed purchase order, commercial invoice and packing and weight list;
- the agreed maritime transport document, such as a bill of lading, together with export and customs data;
- the origin declaration where CETA is used, an inspection report and an insurance document, as appropriate to the agreed terms;
- documents supporting the status of the goods and any additional documents required for the specific shipment.
This is an organisational checklist, not a statement that every document listed is always legally mandatory.A Polish importer carrying out customs operations needs an appropriate EORI number. It should be arranged before customs clearance, rather than only after the container arrives. [17]Consistency between documents matters as much as the number of documents. Entity names, the goods description, weight, number of packages and container identification should not present conflicting versions of the same transaction.
Check SENT before collecting the cargo
From 17 March 2026, the catalogue of goods subject to SENT monitoring includes, among other items, CN 6309 00 00 where the gross weight of the consignment exceeds 10 kg. The rules provide for exclusions, so the scope of obligations must be established for the actual route, procedure and parties involved in the transport. [20]Before arranging transport from the port, establish with the customs service provider and carrier whether a notification is required, who will make it and who will complete the relevant data. Do not assume that possession of the exporter's invoice determines all applicable obligations.What should a contract for a container of unsorted clothing include?
Terms such as “original”, “unsorted” and “credential” should have the meaning assigned to them by the parties in the contract. Without definitions, they are difficult to use as acceptance criteria.| Contract element | What to agree | What problem it helps reduce |
|---|---|---|
| Parties and payment | Legal names, representation, payment beneficiary, currency and payment stages. | A dispute over who sold the goods and who should have received payment. |
| Subject of the sale | Source of collection, prior selection, permitted categories, exclusions and packing. | Different interpretations of the term “unsorted”. |
| Weight and quantity | Net or gross settlement, place of weighing, weight document and method for resolving discrepancies. | Payment for a different weight from the one expected. |
| Quality and sampling | Unacceptable characteristics, sample selection, assessment method and consequences of non-conformity. | A claim based solely on a subjective assessment. |
| Documents and origin | Document issuers, delivery deadlines, basis for CETA and cooperation during verification. | Missing documentation after the shipment has been paid for. |
| Transport and insurance | Incoterms rule, named place and version, costs, transfer of risk and insurance policy. | Confusing payment of freight with responsibility for the cargo. |
| Claims and disputes | Deadlines, evidence, preservation of the goods, remedies, governing law and dispute resolution method. | A procedure that cannot practically be used after unloading. |
Payment: safeguards should reflect the risk
Documentary letter of credit
A letter of credit can be useful in a new trading relationship, but it does not guarantee the contents of a container. Under a mechanism governed by UCP 600, the bank examines documents, not the physical goods. [24]If payment is to depend on an inspection, agree with the bank what document is required, who must issue it and what it must contain. A general condition that “the goods must be of good quality” does not replace a properly drafted documentary condition.The inspector's report should identify the shipment, state the criteria applied and disclose the limitations of the inspection. The bank's acceptance of the documents still does not mean that the bank has physically inspected the clothing.Staged bank transfer
With staged payments, the most important issue is the event that triggers each payment. The parties can negotiate links between successive portions of the price and preparation of the shipment, inspection, loading and presentation of documents.There is no single percentage split appropriate for every first transaction. Also agree the consequences of delay, an adverse inspection result or failure to provide the required documents.Full prepayment
Prepayment reduces the seller's risk of not being paid after dispatch, but increases the buyer's exposure before the goods are received. For a first transaction, it should be assessed together with the counterparty's credibility and the realistic ability to pursue claims. [24]A particularly concerning combination is full prepayment, an unexplained third-party bank account and refusal to allow inspection of the shipment. No single document automatically offsets that combination of risks.Incoterms and cargo insurance: separate costs from the transfer of risk
State the rule, exact place or port and version in the contract, for example Incoterms® 2020.For container transport, the use of FOB requires care. The ICC notes that where goods are handed to the carrier before they are placed on board the vessel, for example at a container terminal, FCA may be the more appropriate rule. [26]Under CIF, the seller arranges freight and insurance, but risk passes to the buyer once the goods have been loaded on board the vessel at the port of shipment. CIF does not mean that the seller remains responsible for every event until the goods reach the Polish warehouse. The standard required insurance coverage is limited. [26]Before accepting the insurance policy, check that it describes the correct goods and route, and review the exclusions, deductible and claims procedure. Ask specifically about risks relevant to used clothing: water ingress, dampness, mould, damage to packaging and theft.Do not treat cargo insurance as a substitute for contractual quality provisions. Establish separately what happens in the event of transport damage and what happens if the delivered shipment does not comply with the specification.
The first container as a pilot shipment
Target Solutions offers a trial 20-foot container with approximately 10,300 kg of goods, an estimated preparation time of 1–3 weeks after order confirmation and approximately 25 days of sea transport from a verified Canadian supplier.A weight of 10,300 kg does not represent the technical maximum payload of every 20-foot container. The stated periods should likewise not be treated as a guaranteed delivery time to the sorting facility. The schedule for a specific order should take account of shipping arrangements, port handling, customs clearance and inland transport.After the first delivery, collect the data needed to assess the next order: weight received, quality breakdown, sorting time, identified non-conformities, weight of material requiring alternative handling and the actual cost of delivering the goods.Practical checklist before the first transaction
- Company: legal name, appropriate register, status, address and representation have been established.
- Payment: the account beneficiary has been confirmed and every discrepancy has been explained in writing.
- Sanctions: the relevant lists and available information on ownership or control have been checked.
- Actual operations: the warehouse, preparation process, shipment history and references have been verified.
- Goods being purchased: unsorted clothing, prior selection, exclusions, weight and packing have been defined.
- Shipment status: the distinction between goods and waste and the appropriate procedure have been clarified.
- Customs and documents: classification, current tariff measures, EORI and the basis for any CETA preference have been checked.
- Contract and insurance: payment, Incoterms, cargo cover, claims and dispute resolution have been agreed.
- Inspection and transport: sampling, lot identification, reporting, loading supervision and SENT obligations, where applicable, have been defined.
- Receipt: weighing, documentation of opening, assessment of the shipment and measurement of the pilot result have been prepared.
The role of Target Solutions: agent versus seller
Under the model described, Target Solutions acts as an agent supporting communication, negotiations and organisation of the process, and is not a party to the sales contract. The clothing sales contract is concluded directly between the exporter and the client. targetpoland.comThe agent will provide information about the price, origin of the goods and payment terms and will facilitate communication between the importer and the supplier.Summary: buy on the basis of evidence, not general assurances
A safer first purchase starts by combining information about the company with documentation for the specific shipment. A company register does not confirm the quality of the clothing, a sample does not describe the entire container, and an origin declaration should not be treated as a formality detached from the actual goods.Before paying a deposit, confirm the counterparty and bank account. Before loading, clarify the shipment's status, specification, documents and inspection. Before placing another order, analyse the outcome of the first delivery.The current cooperation model is presented in the offer of used clothing from Canada for importers and sorting facilities. To discuss availability, the terms of a first order and the agreed scope of support, contact Target Solutions. Be prepared to provide information on the intended purchase volume, sorting capacity and expectations for the shipment.Sources
Sources checked: 3 October 2026. The links below lead to the sources used in this publication. Each entry indicates the subject matter it supports.Target Poland offer and materials
- Used clothing offer from Canada — agency model, indicative container weight and timetable.
- Publication on importing used clothing from Canada for sorting facilities — related information; preparation time should be reconciled separately with the offer.
- Contact Target Solutions.
Company, identifiers and sanctions
- Corporations Canada — federal corporate register and scope of the database.
- Canada Revenue Agency — Business Number and programme accounts.
- CBSA — registration for the Canadian Export Reporting System.
- CBSA — exporter reporting obligations and distinction for restricted goods.
- European Commission — sanctions and official verification resources.
- Polish Ministry of the Interior and Administration — Polish sanctions list.
- Government of Canada — consolidated Canadian sanctions list and its limitations.
Classification, CETA, VAT and transport
- CBSA — Chapter 63 of the 2026 tariff, Note 3 concerning HS heading 6309. Source for HS classification conditions, not the EU import duty rate.
- European Commission — TARIC and the scope of the official EU tariff.
- CETA — Protocol on rules of origin, in particular Articles 7 and 18–19 and Annexes 2 and 5.
- CETA — Annex 2-A concerning tariff elimination.
- CETA — Canadian and EU tariff schedules.
- Polish Ministry of Finance — guidance concerning the CETA origin declaration, BN and REX.
- European Commission — EORI.
- Polish Ministry of Finance — VAT rates.
- Polish VAT Act — updated text, Article 30b.
- Polish National Revenue Administration — SENT changes applicable from 17 March 2026, codes, thresholds and exclusions.
Used goods and waste
- Directive 2008/98/EC — consolidated text, definitions of waste and reuse.
- Regulation (EU) 2024/1157 — shipments of waste, in particular Articles 18, 52–53 and 85–86.
- Directive (EU) 2025/1892 — textiles, documentation and transposition deadline.